Filter by…
Categories:
Time period (in years):
Entity/is a funder/s:
Entity/is a contributor/s:
Principal investigator:

Renewable Hydrogen Installation Project in Local Energy Community based on Photovoltaic Solar Energy, for hybridization with a power of 607.75 kWp located in the plots 10075, 20075, 50075 and 60075 of polygon 2 of the municipality of Gotarrendura (Ávila).
Year: 2023
Principal investigator: Susana Lagüela López
Financing entities: Fernando Martín Fernández

Modification of the GIS tools for the technical management of pavement and road surface maintenance on the State Road Network.
Year: 2023
Principal investigator: Inmaculada Picón
Financing entities: TPF GETINSA EUROESTUDIOS

Development of a viewer and open source web applications for the technical management of pavement and road surface maintenance on the State Road Network.
Year: 2023

Study for the prevention of fires and floods in the municipalities of the province of Ávila.
Year: 2020 to 2024

Smart Fire Lora Prototype Development
Year: 2022

Analysis of the technical and economic feasibility of the electrification of the city bus fleet in Ávila.
Year: 2020 to 2021
Collaborating entity/s: Cátedra VIII Centenario USAL

Plan for Mitigation and Adaptation to Climate Change and Fair Transition to a Low Carbon Economy in the province of Ávila - PMACCAvila
Year: 2020 to 2021

Connection and control of mechanical systems with Unreal Engine 4 through industrial PLCs project
Year: 2019 to 2021
Collaborating entity/s: Adventia – European Aviation College SA, Drivesim

Analysis of the roofs of buildings of the Junta de Castilla y Leon
Year: 2021

3D model and geophysics of Ulaca turret, orthophoto and drone flight
Year: 2020

Interactive for the virtual visit of the Cueva de la Griega (Pedraza, Segovia)
Year: 2020
Collaborating entity/s: Consejería de Medioambiente, Universidad de Salamanca

ENER3DMAP-Distributed Energy Customer and Resource Management: Energy Mapping
Year: 2017 to 2019
Collaborating entity/s: Catedra VIII Centenario USAL

New technologies for 3D modelling in inspection and maintenance
Year: 2018 to 2019
Collaborating entity/s: ITOS3D

Survey and 3d modelling of the church of Adanero (Ávila)
Year: 2019
Collaborating entity/s: Consejería de Medioambiente, Universidad de Salamanca

Technical assistance service to carry out work for the determination of water needs in Spanish irrigation using tools based on the SIAR network, remote sensing and GIS.
Year: 2016 to 2018
Collaborating entity/s: Universidad de Castilla y la Mancha

3D survey of historic buildings with backpack mobile mapping system
Year: 2018
Collaborating entity/s: HERGONSA

Development of a web-based software application for the visualisation of photogrammetric flights and point clouds by a senior programmer.
Year: 2018
Collaborating entity/s: ITOS3D

Framework collaboration agreement between the company Avansis Integración S.L. and the University of Castilla-La Mancha.
Year: 2016 to 2017
Collaborating entity/s: Universidad de Castilla y la Mancha

Framework collaboration agreement between the Iberovías company and the University of Castilla y la Mancha
Year: 2016 to 2017
Collaborating entity/s: Universidad de Castilla y la Mancha

Framework collaboration agreement between the company Rover Alcisa S.A. and the University of Castilla y la Mancha.
Year: 2016 to 2017
Collaborating entity/s: Universidad de Castilla y la Mancha

Framework collaboration agreement between the company Cyes Maritime Works and the University of Castilla y la Mancha.
Year: 2016 to 2017
Collaborating entity/s: Universidad de Castilla y la Mancha

Access to NDVI and RGB products derived from satellite imagery via the SpiderwebGIS system.
Year: 2016 to 2017
Collaborating entity/s: Universidad de Castilla y la Mancha

Innovation study for a more efficient use of water in irrigation using tools based on the SIAR network, remote sensing and GIS.
Year: 2014 to 2017
Collaborating entity/s: Universidad de Castilla y la Mancha

Indoor Mapping - Heritage Buildings
Year: 2017
Collaborating entity/s: ITOS 3D Engineering

AENOR project 1993/0161/PIDI/16 (EF2014) "Pratio2012".
Year: 2016
Collaborating entity/s: Universidad de Castilla y la Mancha

Development of an "Analysis Centre for Irrigated Agriculture (CAPRA)" to improve water resources management in regional agriculture.
Year: 2015 to 2016
Collaborating entity/s: Universidad de Castilla y la Mancha

Access to NDVI and RGB products derived from satellite imagery through the SPIDERWEBGIS system.
Year: 2015 to 2016
Collaborating entity/s: Universidad de Castilla y la Mancha

Technical service for the statistical validation of the improvement of the LIDAR classification of the National Aerial Orthophotography Plan.
Year: 2016
Collaborating entity/s: Universidad de Castilla y la Mancha

Technology transfer, promotion and commercialisation of research work carried out by the recognised research group TIDOP.
Year: 2014 to 2015
Collaborating entity/s: Unidad de Investigación TIDOP

Development of algorithms for point cloud processing
Year: 2015
Collaborating entity/s: Grupo de Investigación TIDOP

Documenting the Cueva Pintada de Galdar (Canary Islands, Spain) using 3D modelling techniques together with the development of a web-based geographic information system.
Year: 2015
Collaborating entity/s: Universidad de Castilla y la Mancha, Universidad de Salamanca

Development and testing of three-dimensional traffic accident reconstruction software PW
Year: 2014
Collaborating entity/s: Policía Local de Salamanca, Insitu

Geomatic Technologies applied to the rock art of eastern Asturias
Year: 2008 to 2013
Collaborating entity/s: Consejería de Cultura y Turismo de Asturias, Consorcio del Oriente de Asturias, Leader Oriente, Universidad de Salamanca

Orthophoto Plan for the Avila Wall. Lienzo Norte
Year: 2012
Collaborating entity/s: Unidad de Investigación TIDOP, Ayuntamiento de Ávila.

Quality control and self-calibration of the ADS80 sweeping chamber. TRACASA
Year: 2012
Collaborating entity/s: Instituto de Desarrollo Regional de Castilla La Mancha

Advanced Data Acquisition Systems for CAD/CAE Design of Electrical Substations
Year: 2010 to 2012
Collaborating entity/s: Unidad de Investigación TIDOP

Orthophoto Plan of the Avila City Wall: East and West Canvas
Year: 2011
Collaborating entity/s: Ayuntamiento de Ávila

Laser and photographic data acquisition, data processing and photorealistic modelling of the church of San Martín and its surroundings, the Jewish Quarter and the Jewish Quarter Museum.
Year: 2010
Collaborating entity/s: Laboratorio de Fotogrametría Arquitectonica de la Universidad de Valladolid

3D Automation in CAD/CAE Design of Electrical Substations
Year: 2010
Collaborating entity/s: Iberdrola

Orthophoto Plan for the Avila Wall. Lienzo Sur
Year: 2010
Collaborating entity/s: Unidad de Investigación TIDOP, Estudio de Arquitectura Duralder

Spatial Information System for the Historic Buildings of Avila
Year: 2009 to 2010
Collaborating entity/s: Unidad de investigación TIDOP, Cuerpo de Bomberos.

Virtual Recreation of USAL's Architectural Heritage
Year: 2010
Collaborating entity/s: Unidad de Investigación TIDOP

sv3DVision software operation contract
Year: 2005 to 2010
Collaborating entity/s: Entidades público/privadas interesadas en explotar el software sv3DVision

Documentation, 3D modelling and metric analysis of the Avila city wall
Year: 2008 to 2009
Collaborating entity/s: Unidad de Investigación TIDOP

Documentation and Virtual Tour of Palazzo Capprotti
Year: 2008 to 2009
Collaborating entity/s: Unidad de Investigación TIDOP

World Heritage Dissemination Material
Year: 2009
Collaborating entity/s: Unidad de Investigación TIDOP, Mito Comunicación.

Development of a Comprehensive Protection Plan for Historic Buildings
Year: 2008 to 2009
Collaborating entity/s: Unidad de investigación TIDOP, Cuerpo de Bomberos.

CAD/CAE Design of Electrical Substations
Year: 2009
Collaborating entity/s: Unidad de Investigación TIDOP

Llonin Cave Laser Survey
Year: 2008 to 2009
Collaborating entity/s: Unidad de Investigación TIDOP, Departamento de Prehistoria de la UNED.

Laser survey of the Loja Cave
Year: 2008 to 2009
Collaborating entity/s: Unidad de Investigación TIDOP, Departamento de Prehistoria de la UNED.

Laser Survey of the Buxu Cave
Year: 2008 to 2009
Collaborating entity/s: Unidad de Investigación TIDOP, Departamento de Prehistoria de la UNED.

Laser survey of the Pindal Cave
Year: 2008 to 2009
Collaborating entity/s: Unidad de Investigación TIDOP, Departamento de Prehistoria de la UNED.

Documentation and 3D reconstruction by terrestrial laser scanner of the wineries of Toro (Zamora).
Year: 2008
Collaborating entity/s: Unidad de Investigación TIDOP

Technical assistance and experimental development for 3D reconstruction and dimensional analysis of road accidents from images. ERAT.
Year: 2008
Collaborating entity/s: Equipo ERAT (Equipo de Reconstrucción de Accidentes de Trafico), Guardia Civil de Tráfico.

Structural monitoring and control of the Arco del Carmen belfry using laser scanner technology
Year: 2007
Collaborating entity/s: Unidad de Investigación TIDOP

Experimental development in new technologies: 3D laser scanner
Year: 2007
Collaborating entity/s: Unidad de Investigación TIDOP

Experimental development for dimensional analysis in criminology using sv3dvision software
Year: 2007
Collaborating entity/s: Unidad de Investigación TIDOP

Documentation, modelling and visualisation of the archaeological site corresponding to the Jewish Tanneries of San Segundo (Ávila) using the laser scanner.
Year: 2006
Collaborating entity/s: Consejería de Medioambiente, Universidad de Valladolid

Documentation, modelling and visualisation of Valencia Cathedral using a combination of laser scanning and high-resolution imagery
Year: 2006
Collaborating entity/s: Unidad de Investigación TIDOP