Publicaciones 2018

Artificial accelerograms to estimate damage of dams by using failure criteria

Autor/es: Zacchei E. and Molina JL
Revista: Scientia Iranica-international journal of science & technology Factor de impacto: 0.48

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Thermal-based analysis for the automatic detection and characterization of thermal bridges in buildings Revista: Energy and Buildings

Autor/es: Garrido, I., Lagüela, S., Arias, P., Balado, J.
Revista: Energy and Buildings Factor de impacto: 4.07

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Assessment of temporally conditioned runoff fractions in unregulated rivers.

Autor/es: Molina JL; Santiago Zazo del Dedo.
Revista: Journal of Hydrologic Engineering Factor de impacto: 1.69

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Leaf Movements of Indoor Plants monitored by Terrestrial LiDAR

Autor/es: Monica Herrero-Huerta, Roderik Lindenbergh, Wolfgang Gard
Revista: Frontiers in Plant Science Factor de impacto: 4.30

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Comparing Terrestrial Laser Scanning (TLS) and Wearable Laser Scanning (WLS) for Individual Tree Modeling at Plot Level

Autor/es: Carlos Cabo, Susana Del Pozo, Pablo Rodríguez-Gonzálvez, Celestino Ordóñez, Diego González-Aguilera
Revista: Remote Sensing Factor de impacto: 3.18

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Differentiating percussion pits and carnivore tooth pits using 3D reconstructions and geometric morphometrics

Autor/es: Jose Yravedra, Julia Aramendi, Miguel Angel Mate-Gonzalez, Lloyd Austin,Courtenay, Diego GonzaÂlez-Aguilera
Revista: PLOS ONE Factor de impacto: 3.54

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Behavior analysis of novel wearable indoor mapping 2 system based on 3D-SLAM

Autor/es: S. Lagüela, I. Dorado, M. Gesto, P. Arias, D. González-Aguilera and H. Lorenzo
Revista: Sensors Factor de impacto: 2.68

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Metrological intercomparison of six terrestrial laser scanning systems

Autor/es: H. González-Jorge, Rodríguez-Gonzálvez P., Y. Shen, S. Lagüela, L. Díaz-Vilariño, R. Lindenbergh, D. González-Aguilera, P. Arias
Revista: IET Science, Measurement & Technology Factor de impacto: 1.263

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Reconstructing the Roman site “Aquis Querquennis” (Bande, Spain) from GPR, T-LiDAR and IRT data fusion

Autor/es: Puente, I., Solla, M., Lagüela, S., Sanjurjo-Pinto, J.
Revista: Remote Sensing Factor de impacto: 3.18

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Active thermography testing and data analysis for the state of conservation of panel paintings

Autor/es: Yao, Y., Sfarra, S., Lagüela, S., Ibarra-Castanedo, C., Wu, J.-Y., Maldague, X.P.V., Ambrosini, D.
Revista: International Journal of Thermal Sciences Factor de impacto: 3.62

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


GRAPHOS – Open-source software for photogrammetric applications

Autor/es: D. González-Aguilera, L. López, P. Rodriguez-Gonzalvez, D. Guerrero, D. Hernandez-Lopez, F. Remondino, F. Menna, E. Nocerino, I. Toschi, A. Ballabeni, M. Gaiani
Revista: Photorammetry Record Factor de impacto: 3.26

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Automatic tree parameter extraction by a Mobile LiDAR System in an urban context

Autor/es: Mónica Herrero-Huerta, Roderik Lindenbergh, Pablo Rodríguez-Gonzálvez
Revista: Plos ONE Factor de impacto: 2.61

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


A new high-resolution 3-D quantitative method for analysing small morphological features: an example using a Cambrian trilobite

Autor/es: Jorge Esteve, Yuan-Long Zhao, Miguel Ángel Maté-González, Miguel Gómez-Heras & Jin Peng
Revista: Scientific reports Factor de impacto: 4.26

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Geoinformatics for the conservation and promotion of cultural heritage in support of the UN Sustainable Development Goals

Autor/es: WenXiao, JonMills, GabrieleGuidi, PabloRodríguez-Gonzálvez, SaraGonizzi Barsantib, Diego González-Aguilera
Revista: ISPRS Journal of Photogrammetry and Remote Sensing Factor de impacto: 6.39

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Combined use of agro-climatic and very high-resolution remote sensing information for crop monitoring

Autor/es: Ballesteros, R., Ortega, J.F., Hernández, D., del Campo, A., Moreno, M.A.
Revista: International Journal of Applied Earth Oberservation and Geoinformation Factor de impacto: 3.93

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Testing accuracy in 2D and 3D geometric morphometric methods for cut mark identification and classification

Autor/es: Lloyd A. Courtenay, Miguel Ángel Maté-González, Julia Aramendi, José Yravedra, Diego González-Aguilera, Manuel Domínguez-Rodrigo
Revista: PeerJ Factor de impacto: 3.51

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Economic and Environmental Analysis of Different District Heating Systems Aided by Geothermal Energy

Autor/es: Cristina Sáez Blázquez, Arturo Farfán Martín, Ignacio Martín Nieto, Diego González-Aguilera
Revista: Energies Factor de impacto: 2.67

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


HidroMap: A New Tool for Irrigation Monitoring and Management Using Free Satellite Imagery

Autor/es: Laura Piedelobo, Damián Ortega-Terol, Susana del Pozo, David Hernández-López, Rocío Ballesteros, Miguel A. Moreno, José-Luis Molina and Diego González-Aguilera
Revista: ISPRS International Journal of Geo-Information Factor de impacto: 1.72

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Flood Hazard Assessment Supported by Reduced Cost Aerial Precision Photogrammetry.

Autor/es: Santiago Zazo; Pablo Rodríguez-Gonzálvez; José-Luis Molina; Diego González-Aguilera; Carlos Andrés Agudelo-Ruiz; David Hernández-López.
Revista: Remote Sensing. MDPI. Factor de impacto: 3.41

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Heritage site preservation with combined radiometric and geometric analysis of TLS data

Autor/es: Luis Javier Sánchez-Aparicio, Susana Del Pozo, Luís F. Ramos, Andrés Arce, Francisco M. Fernandes
Revista: Automation in Construction Factor de impacto: 4.03

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Integrating geomatic approaches, operational modal analysis, advanced numerical simulations and updating methods to evaluate the current safety conditions of the historical Bôco bridge.

Autor/es: Álvaro Bautista-De Castro, Luis Javier Sánchez-Aparicio, Luís F. Ramos, José Sena-Cruz, Diego González-Aguilera
Revista: Constructoin and Building Materials Factor de impacto: 3.49

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Use of a Wearable Mobile Laser System in Seamless Indoor 3D Mapping of a Complex Historical Site

Autor/es: Andrea di Filippo, Luis Javier Sánchez-Aparicio, Salvatore Barba, José Antonio Martín-Jiméne, Rocío Mora, Diego González Aguilera
Revista: Remote Sensing Factor de impacto: 3.41

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Geometric-morphometric analysis of tooth pits and the identification of felid and hyenid agency in bone modification

Autor/es: Mari Carmen Arriaza, Julia Aramendi, Miguel Ángel Maté-González, José Yravedra, Enrique Baquedano, Diego González-Aguilera, Manuel Domínguez-Rodrigo
Revista: Quaternary International Factor de impacto: 2.16

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


New Taphonomic Advances in 3D Digital Microscopy: A Morphological Characterisation of Trampling Marks

Autor/es: Lloyd A. Courtenay, Jose Yravedra, Rosa Huguet, Andreu Ollé, Julia Aramendi, Miguel Ángel Maté-González, Diego Gonzalez-Aguilera
Revista: Quaternary International Factor de impacto: 2.16

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Close-Range Photogrammetry and Infrared Imaging for Non-Invasive Honeybee Hive Population Assessment

Autor/es: Luis López-Fernández, Susana Lagüela, Pablo Rodríguez-Gonzálvez, José Antonio Martín-Jiménez, Diego González-Aguilera
Revista: ISPRS International Journal of Geo-Information Factor de impacto: 1.72

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Novel approach for three-dimensional integral documentation of machine rooms in hospitals using portable mobile mapping system

Autor/es: Manuel Rodríguez-Martín, Pablo Rodríguez-Gonzálvez, Diego Gonzalez-Aguilera, Erica Nocerino
Revista: IEEE Access Factor de impacto: 3.56

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Road safety evaluation through automatic extraction of road horizontal alignments from Mobile LiDAR System and inductive reasoning based on a decision tree

Autor/es: José Antonio Martín-Jiménez, Santiago Zazo, José Juan Arranz Justel, Pablo Rodríguez-Gonzálvez, Diego González-Aguilera
Revista: ISPRS Journal of Photogrammetry and Remote Sensing Factor de impacto: 6.39

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Thermal conductivity characterization of three geological formations by the implementation of geophysical methods

Autor/es: Cristina Sáez Blázquez, Arturo Farfán Martín, Pedro Carrasco García, Diego González-Aguilera
Revista: Geothermics Factor de impacto: 2.55

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Joint use of GPR, IRT and TLS techniques for the integral damage detection in paving

Autor/es: SusanaLagüela, MercedesSolla, IvánPuente, F. JavierPrego
Revista: Construction and Building Materials Factor de impacto: 3.49

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


La seguridad de la vida en el planeta, deducida mediante análisis de los acuerdos de las cumbres mundiales del clima y de los informes del IPCC

Autor/es: Juan Ignacion Canelo Perez, Susana Lagüela Lopez, Pedro Mas Alique, Arturo Farfan Martin
Revista: Dyna Factor de impacto: 0.52

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Valorisation of history and landscape for promoting the memory of WWI

Autor/es: Erica Nocerino, Fabio Menna, Isabella Toschi, Daniele Morabito, Fabio Remondino, Pablo Rodríguez-Gonzálvez
Revista: Journal of Cultural Heritage Factor de impacto: 1.70

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Shape optimization of double arch dams by using parameters obtained through Bayesian estimators

Autor/es: Zacchei E. and Molina JL
Revista: Iranian Journal of Science and Technology. Transaction in Civil Engineering Factor de impacto: 0.514

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


A novel planning approach for the water, sanitation and hygiene (WASH) sector: the use of Object-Oriented Bayesian networks

Autor/es: Giné R; Requejo D; Molina JL; Perez-Foguet A.
Revista: Environmental Modelling and Software Factor de impacto: 1.47

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Multiobjective Optimization Modeling Approach forMultipurpose Single Reservoir Operation

Autor/es: Recio Villa, I; Martínez Rodríguez, JB; Molina JL; Pino Tarragó, JC
Revista: Water Factor de impacto: 2.07

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Nonlinear Degradation Analysis of Arch-Dam Blocks by using Deterministic and Probabilistic Seismic Input

Autor/es: Zacchei, E: Molina JL; Reyolando B.
Revista: Journal of Vibration Engineering & Technologies Factor de impacto: 0.62

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Onion biomass monitoring using UAV-based RGB imaging

Autor/es: Ballesteros Rocio; Ortega, Jose Fernando; Hernandez David; Moreno, Miguel Angel
Revista: Precision Agriculture Factor de impacto: 2.02

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


Editorial for Special Issue “Recent advances in GPR imaging”.

Autor/es: Solla, M., Lagüela, S.
Revista: Remote Sensing Factor de impacto: 3.18

Creado en el año 2005 el grupo de investigación TIDOP, perteneciente al Departamento de Ingeniería Cartográfica y del Terreno de la Universidad de Salamanca (una de las Universidades más antiguas de Europa y referente académico con alrededor de 800 años de existencia), aúna sus esfuerzos en el desarrollo y aplicación de sensores inteligentes y sistemas computacionales a la ingeniería y arquitectura.

The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.The Geomatic Technologies for the 3D digitalization and modelling of complex objetcs (TIDOP) research group was created on 2005 and belongs to the Land and Cartographic Engineering Department of the University of Salamanca (one of the oldest universities in Europe and an academic point of reference throughout its almost 800 years of existence).This recognized research group is characterized by multi-disciplinary members with diverse profiles: geomatics, computer scientist, industrial engineers, civil engineers and architects devoted to the development and application of intelligent sensors and computer systems to engineering and architecture applications. One of the main streams of this group is the transfer of technology with more than 10 patents and intellectual properties.In the last years, the researchers have focused majority of the efforts on the development of algorithms and tools for modelling the world in 3D at scale only using photographs or points clouds. They have been awarded with several international and nationals prizes. As a result, TIDOP research unit works on more than ten projects in collaboration with leading companies in these industries and other issues related to aerospatial systems, energy, security, transport and road inventory and maintenance.

Publicaciones 2017


×
Análisis termográfico de edificios

 

El uso de la termografía infrarroja comMapaEnergeticoo técnica sobradamente provada para la inspección de edificios y localización de patologías como fugas de aire, humedades, etc. Nos permite realizar un examen visual “in-situ” de calidad de los objetos de estudio gracias a la posibilidad de visualizar en tiempo real los resultados pudiendo detectar sin dificultad los desperfectos o elementos característicos de estos. Estas técnicas de medición cualitativa nos proporcionan la posibilidad de realizar inspecciones rápidas y eficaces sin contacto directo con el objeto y de forma no destructiva, lo que disminuye tanto el riesgo de incidentes para los operarios como los daños producidos en los propios objetos de estudio ocasionados por otras técnicas intrusivas. Además, también se ha demostrado la utilidad de la termografía infrarroja como técnica puramente de medida a través de su utilización para el cálculo de propiedades termofísicas de materiales tales como difusividad y transmitancia térmica.

En el caso de termografía cualitativa, las publicaciones existentes tratan de estudios realizados in-situ, principalmente en edificios históricos o elementos del patrimonio cultural, mientras que los estudios cualitativos se realizan, en la mayor parte de los casos, en laboratorios sobre muestras de tamaño limitado. En aquellos casos en los que se han realizado estudios termográficos cuantitativos sobre edificios in-situ, los valores de temperatura son empleados con el objetivo de obtener propiedades termofísicas (conductancia térmica) reales del cerramiento, sin embargo su distribución espacial no es considerada.

Conjugar ambas aplicaciones permitirá la automatización del cálculo de pérdidas de calor a partir de las temperaturas medidas con una cámara termográfica. De este modo, no solo se usa la termografía para representar el estado de la pared, sino que también se usan los valores de temperatura contenidos en la termografía para la extracción de parámetros métricos del edificio en estudio, por lo que la hibridación de la información termográfica con el material cartográfico de precisión permitiría extraer la geometría real del objeto de estudio con textura termográfica, pudiendo así realizar mediciones precisas de los elementos de interés directamente sobre el resultado obtenido.

 

20140220-usal-ensmart-panoramica-728

 

Estudios como el publicado por EuroACE en 2010 colocan la mejora de la eficiencia energética en edificación en cabeza de las acciones necesarias para la reducción de emisiones de gases del efecto invernadero y gasto energético, así como para servir de empuje a la generación de empleo. Especial es el caso del parque de edificios ya construidos, la mayoría procedente de los años 1940-80, con normativa inexistente y recursos escasos. En ellos las obras de rehabilitación energética pueden suponer un ahorro de hasta el 75% en consumo de energía. En España existen 13 millones de viviendas susceptibles de intervención, cuya rehabilitación energética supondría una reducción de las emisiones del sector del 34% con respecto al año 2001.

×
Building thermographic analysis

 

 

The use of infraMapaEnergeticored thermography as a widely tested technique for building inspection and location of pathologies such as air leakage and moisture allows the performance of  quality “in-situ” visual examination of the objects under study due to the possibility of obtaining real-time results, being able to detect without difficulty damages or material characteristics. This qualitative measurement technique provides the capability of doing quick, effective and non-destructive inspection without direct contact with the object under study, decreasing the risk of incidents to operators and the damage of the objects comparing with other intrusive techniques. Furthermore, the utility of infrared thermography as a measurement technique has been proved by its use for the determination of the thermophysical properties of materials such as diffusivity and thermal transmittance.

In the qualitative approach, some authors have performed in-situ studies, mainly in historical buildings or cultural heritage elements, whereas quantitative studies are performed mainly in laboratories with limited size samples. In those cases where quantitative thermography studies were performed in-situ, temperature values were employed in order to obtain the real thermophysical properties (thermal conductance) of the building envelope, but their spatial distribution is not considered.

Combine both applications will enable the automation of the heat loss computation from the measured temperatures with a thermographic camera. Thus, the thermography is not only used to represent the state of the wall, but also temperature values represented on the thermography for extracting the metric parameters of the study object so the hybridization of the thermographic information with precise cartographic material would  allow to extract the actual geometry of the object of study with thermal texture, being able to make accurate measurements of the elements of interest directly on the obtained results.

 

20140220-usal-ensmart-panoramica-728

 

Studies such as the one published by EuroACE in 2010, places improved energy efficiency in building construction at the top of the list of actions that need to be taken to reduce greenhouse gases and energy costs, in addition to acting as a stimulus to generate employment. In particular is the case of existing buildings stock, most of which dates back to the period 1940-80, constructed using non-existent standards and scarce resources. Here, energy refurbishment works could represent a saving of up to 75% in energy consumption. In Spain there are 13 million homes that could be the subject of intervention, where energy refurbishment could result in a reduction in sector emissions of 34% compared to 2001.

 

×
×
Ventana modal ingles
×
Ventana modal español
×
Mobile Laser System (MLS) applied to urban tree inventory

In urbanized Western Europe trees are considered an important component of the built-up environment. This also means that there is an increasing demand for tree inventories. Laser mobile mapping systems provide an efficient and accurate way to sample the 3D road surrounding including notable roadside trees. In this research line, a processing chain aiming at the extraction of tree locations and tree sizes from laser mobile mapping data is reached.

  • Vegetation extraction

MLS_urban_3

  • Tree parameter extraction

MLS_urban_2

 

Such steps, in combination with code optimization are expected to be sufficient to reach the final goal of automatized estimation of features sampled by mobile mapping at a rate that matches the acquisition speed and at a quality that matches the result of a human operator.

×
Miembro del grupo TIDOP

Lloyd A. Courtenay

Graduado en arqueología por la Universidad Complutense de Madrid. Actualmente está acabando un Máster en Arqueología del Cuaternario y Evolución Humana por la Universidad Rovira i Virgili, Tarragona, con el objetivo de seguir con su formación investigadora matriculándose en un programa de Doctorado en prehistoria para el próximo año académico. Habiéndose especializado en el campo de la tafonomía, trabaja principalmente en el estudio microscópico de los restos óseos que aparecen en los yacimientos arqueológicos y paleontológicos. Su principal campo de investigación está dirigido hacia la aplicación de nuevas metodologías en yacimientos del Pleistoceno Inferior Africano. En los últimos años ha emprendido su carrera profesional adaptando los nuevos avances estadísticos en otros campos como la Inteligencia Artificial, buscando maneras de aplicarlos al estudio del registro fósil. Siguiendo esta línea de investigación, ha conseguido desarrollar una serie de algoritmos aplicando métodos de Machine y Deep Learning para el procesado de datos derivados de modelos 3D. Con el diseño de algoritmos complejos como las Redes de Neuronas Artificiales y las Máquinas de Vectores de Soporte, ha desarrollado nuevos modelos estadísticos que pueden distinguir entre la actividad de diferentes carnívoros a través de las marcas de dientes que dejan. Estos modelos permiten también la clasificación de las alteraciones microscópicas halladas como producto de agentes naturales o por el contrario, si fueron consecuencia de las actividades de caza de los antiguos homínidos.

Líneas de investigación:

  • Tafonomía y zooarqueología aplicado al estudio del Pleistoceno Inferior
  • Desarrollo de nuevos métodos para el estudio microscópico de los restos fósiles
  • Diseño y aplicación de nuevos métodos estadísticos en la arqueología, incluyendo la aplicación de técnicas 3D para la documentación de restos óseos, y el uso de algoritmos de Inteligencia Artificial para procesar tales datos
×
TIDOP Member

Lloyd A. Courtenay

An Archaeology graduate having studied in the Complutense University of Madrid, he is currently finishing his Master’s degree in Quaternary Archaeology and Human Evolution in the University Rovira I Virgili, Tarragona. Starting next academic year, he intends to continue his professional career by enrolling in a Doctoral programme in prehistory. Specialised in the field of taphonomy, he works primarily on the microscopic study of osteological materials found in archaeological and paleontological sites. His main field of research lies in the development of new methods for the study of Lower Pleistocene sites in Africa. Over the last couple of years, he has focused his research on the adaptation of new statistical advances from other fields of research, such as Artificial Intelligence, with the hope of finding new means of applying these techniques to the prehistoric fossil register. Through this line of research, he has achieved the development of Machine and Deep Learning algorithms for the processing of 3D data. His most notable advances have included the development of Artificial Neural Networks and Support Vector Machines for the differentiation of carnivore activity through the tooth marks animals may leave on bone. He has also achieved models that are able to successfully classify microscopic traces, discerning between natural agents and those produced by ancient hominids in prehistoric butchery practices.

Research lines:

  • Taphonomy and zooarchaeology applied to the Lower Pleistocene
  • Development of new methodological approaches for the study of fossil remains
  • Design and application of new statistical models for archaeological studies, including 3D modelling for the documentation of bone, and the use of Artificial Intelligence algorithms for the processing of this data
×
Drones terrestres aplicados al modelizado tridimensional e inspección de infraestructuras críticas y de difícil acceso.

dron_2

Equipar drones con sensores láser, detectores de obstáculos y sistemas de control remoto permite obtener de forma segura y fiable los modelos tridimensionales de escenarios críticos, entendiendo como escenarios críticos todos aquellos escenarios en los que una persona correría peligro realizando los trabajos.

Este tipo de escenarios abarcan desde grutas angostas y estrechas a las que es difícil acceder, hasta escenarios industriales complejos, como subestaciones eléctricas, en las que existen riesgos de descargas eléctricas, salas de calderas, edificios con problemas estructurales etc.

A pesar de ser lugares críticos, su mantenimiento e inspección es un aspecto clave en el campo del control preventivo de averías y deformaciones, por lo que obtener el modelo tridimensional de estos lugares es fundamental. En este sentido, los drones terrestres, cada vez más sofisticados, permiten integrar escáner láser terrestre para capturar el entorno, asi como detectores de obstáculos y diferentes sistemas de comunicación, de modo que pueden moverse de forma autónoma o ser teledirigidos de forma remota.

Hasta el momento se ha investigado la integración de drones terrestres y escáner láser utilizando dos metodologías de trabajo diferentes, según el grado de precisión y detalle que se necesite y dependiendo de las dimensiones del espacio en el que se esté trabajando.

 

Finalmente, se está investigando la manera de combinar los modelos tridimensionales obtenidos por los drones terrestres con datos procedentes de drones aéreos equipados con cámaras fotográficas o cámaras termográficas. Combinar ambos modelos es esencial para obtener una cobertura total de la escena de estudio y poder detectar anomalías en cualquier lugar. Ésta línea de acción se está introduciendo para controlar subestaciones eléctricas y plantas solares fotovoltaicas ya que en ambos casos es posible detectar zonas con un calentamiento anormal que indiquen un funcionamiento que deberá revisarse.

 

dron_4 dron_3

×
Land drones applied to three-dimensional modeling and control of complex industrial environments

dron_2

Land drones can be armed with different devices such as terrestrial laser scanner, obstacle detectors or remote control systems, in order to provide accurate 3D models of unattended or critical environments in a safe way.

Environments like narrow caves that are difficult to access, electrical substations where there are risk of electric shock, boiler rooms or buildings with structural problems are considered critical environments for human operators due to the danger they entail.

Despite being critical spaces, its maintenance, inspection and control are essential to prevent damages and detect breakdowns, so accurate three-dimensional models are indispensable. For this purpose, terrestrial drones allow the integration of terrestrial laser scanners to capture the environment, as well as obstacle detectors and different communication systems, so that they can be autonomous vehicles or remote-controlled vehicles.

Depending on the accuracy needed and the dimensions of the study case, two different  combinations of technologies have been explored, both combining laser scanner with land drones.

To complete this research line, we are working in different methodologies to combine 3D models obtained with land drones and data obtained with aerial drones equipped with conventional cameras or thermo graphic cameras.

Mix both kind of models make the three-dimensional model much more complete and it is possible to detect pathologies in almost everywhere.  Some of this process has been used with success in electrical substations and photovoltaic solar plants, detecting, for example, anomalies in some panels.

 

dron_4 dron_3

×